Georgia World Congress Center Booth Rules, Height Limits & Labor
|
Booth type
|
Typical structure height
|
Hanging signs
|
|---|---|---|
|
Inline / linear (10×10, 10×20)
|
Often 8 ft–8 ft 3 in; front half often limited to about 4 ft
|
Usually not permitted
|
|
Perimeter
|
Often 12 ft
|
Usually not permitted
|
|
Peninsula / split island
|
Often 16 ft
|
Sometimes permitted
|
|
Island (20×20 and up)
|
Often 16 ft–16 ft 6 in; some shows allow ~20 ft
|
Often permitted if 400 sq ft+
|
Multi-level / covered booths: Island only in many kits. Expect drawings to GWCC Event Services and fire-watch labor for enclosed or two-story exhibits during non-show hours.Labor at GWCCCompared with Javits or Moscone, Atlanta is friendlier to exhibitor self-setup.
- Many 10×10 and 10×20 portables can be set by exhibitor staff
- You can often hire GSC labor or an EAC if you do not want to self-set
- Dock freight and floor moves still go through the official general contractor
- Electrical, hanging signs, and lifts are contractor jobs
- Always read that show’s labor page — GSC agreements differ
Which displays work well at GWCC10×10 / 10×20: Pop-up, tension fabric, backlit wall.
20×20+: Modular or custom island; hanging sign if the kit allows it. Large halls reward height and contrast.
Double-deck: Only with GWCC / fire approval.FAQHow tall can a 10×10 be at GWCC? Usually about 8 ft–8 ft 3 in.
Do I need union labor? Often not for a simple portable. Plan contractor labor for islands, rigging, and freight.
Are these official rules? No. Your exhibitor kit controls.Official sources
- Your show’s display-regulations PDF
- Georgia World Congress Center
Contact Impact Displays · 1-877-217-2681